Please select your home edition
Edition
Upffront 2020 Foredeck Club SW LEADERBOARD

Get a grip! What's the right halyard rope for my sailing boat?

by Aleix Escorsell 14 Apr 08:00 UTC
Get a grip! What's the right halyard rope for my sailing boat? © Jason Ball

Choosing the correct line for your halyard doesn't just improve performance, it's essential for keeping your sails safe. Lose a halyard while sailing and you'll likely have to end your race and head to the loft for repairs, so making sure you use the very best for your halyards is a worthwhile investment.

Gone are the days of heavy metal wire halyards, with so many advances in rope technology there are a baffling number of options available, from basic polyester double braid to new high-tech materials. (N.B. If you are looking to upgrade from wires? You'll also need to replace your sheaves with U shaped rope sheaves, instead of traditional V-shaped sheaves).

Below is a top level guide to selecting the right halyard for your needs...

Diameter and Length

The diameter of your halyard is determined by 2 factors:

  1. The strength of the material in relation to the loads on board
  2. Size of your clutches and winches on board

For most gear on a sailing boat, the size is governed by the Safe Working Load (SWL) as specified by the manufacturer. Empirical relations, and rules of thumb can also be used to determine the expected loads so that deck gear can be properly matched.

When choosing a halyard, SWL is still a key factor, but with improved strength of modern materials, selecting based on SWL alone will often lead to a line diameter which is less practical for handling i.e. too thin. For example, an 8mm performance halyard may have the required strength for a 40ft boat but if the clutches and winches are setup for 10mm lines it may be worth sticking with a 10mm halyard.

The table below is the starting point we use for a mid-displacement monohulls, to specify lines, but we do then cross reference with the boat type and mast / deck hardware onboard. If you have a very heavy displacement boat or a multihull, line diameters may well increase from these guide figures.

 <24ft25-30ft31-37ft38-46ft47-55ft
Main / Genoa Halyard 1:16-8mm8mm8-10mm10-12mm12-4mm
Main Halyard 2:16mm6-8mm8-10mm10-12mm12-4mm
Spinnaker Halyard 1:16mm6-8mm8-10mm10-12mm12-4mm
Code Zero Halyard 2:16mm6-8mm8-10mm10mm12mm

Halyard length can also be easily calculated from basic rig dimensions. Again, these are generic calculators and have safety factors built in (better to be too long than too short!) and you can modify the formulas to suit your own specific deck layout, to get a more accurate fit for your boat.

Material Selection

The right material for your halyard depends very much on whether you are a cruiser or performance racer. Halyard lines are generally comprised to two elements, the core and the cover. The core determines the strength and stretch of the line, while a multitude of cover materials and blends provide a whole range of rope properties from softness in the hand to good grip in jammers and clutches.

Core Material

Most cruisers wouldn't need to look much further than polyester. An affordable, reliable, soft line that can be easily spliced. For larger boats (above 40-45ft) or more demanding cruising, such as blue water cruising, it's worth considering Dyneema® or other UHMPE cores with much lower stretch..

For larger cruising boats and performance regatta sailors, these UHMPE fibres are a must. Cost effective options include Dyneema® SK78 and Stirotex. For grand prix racing boats Dyneema® SK99 is preferable for its higher working load and negligible stretch.

Cover Material

Again, for cruisers, polyester is a great choice. This is a cost-effective cover which has excellent durability, abrasion resistance that becomes grippier with use. Polyester is still the starting point for Performance cruisers and racers. However, with more demanding and extreme usage, and to adapt the cover for more specific applications, additional high-tech fibres, such as Cordura, Technora, Vectran or Kevlar, that are blended with the Polyester, improve abrasion resistance, grip in clutches and heat resistance on highly loaded winches and so on.

Splicing

Beyond a standard eye splice, many performance boats will opt for stripped and recovered halyard ends. This means a section of the original cover is removed from the rope at the working end and replaced with a thin Dyneema® cover.

The Dyneema® cover is light weight, low friction and super-durable. At the cockpit end, a reeving eye or Flemish eye allows for a quick connection to a mouse line to pull the halyard through the mast.

Hardware

It is always best to splice any hardware into the working end of your halyard. A knot will generally reduce the break strength of your line by up to 50%, whereas a well made splice will hold 100% of the lines working load. Popular options include captive-pin, standard / long D shackles, or 2:1 shackles for a main halyard, or piston snap shackles for a jib / spinnaker halyard.

At Upffront, we are also big advocates of soft solutions, and we recommend to sailors that a soft shackle is a cheap, lightweight, durable solution for the majority of situations.

Summary

  1. Choose the correct diameter based on existing hardware
  2. Calculate the length required from basic, easily available rig/boat geometry data
  3. Core material choice is driven by boat size, performance parameters and budget!
  4. Cover choice - start with Polyester but then add exotics to deal with specific / known issues like abrasion or slipping in clutches
  5. Select your hardware

That's all the information you need to get started in upgrading your halyards. Why not check out our running rigging help page linked below, with links to calculators, information and a guide to help you select the best options for you!

Running Rigging Help

If you'd prefer to speak to one of our specialists, who can guide you through the process, contact us at and tell us what you need.

Related Articles

NEXe Furler
Effortless furling powered by Profurl The NEXe from Profurl is an easy to retrofit electrically driven Code 0 or top-down gennaker furler. With the NEXe, you can furl/unfurl your sails, from anywhere on the boat, quickly with easily, and you will never have to manually furl your sails again! Posted on 12 May
What's The Right Sheet For My Boat?
Picking out the perfect option, made simple by upffront.com Picking out the perfect sheet can be difficult, but we're here to help! Check out the information below for some tips on what you should consider when buying. Posted on 6 May
Sika adhesives and sealants
Strong and sustainable products now sold by upffront.com Sika is a speciality chemicals manufacturer with a clear focus on reducing environmental impact. Their strategy "more value, less impact" aligns their commitment to producing high quality products with the goal of minimising waste and pollution. Posted on 28 Apr
The Best Code Zero Furlers for 25-30ft yachts
A detailed technical comparison by upffront.com If you have a 25-30ft sailboat and you are looking to boost your sailing performance with a code zero or asymmetric spinnaker then you will need a furler in the 900-1000kg working load range. Posted on 7 Apr
Fourth Cape Weedwand
Don't go overboard clearing your rudders Rudders are prone to catching seaweed, particularly when there are two of them! Dragging weed will slow down any boat but is especially problematic when racing. Therefore it's important to check regularly and have a reliable method for removing weed. Posted on 2 Apr
Armare Zero Twist Torsional Ropes
Reviewed by upffront.com Armare Ropes is a 200-year-old, family owned, rope making business in Northern Italy. Upffront are pleased to launch a new range of finished torsional ropes, for code zero and asymmetric furlers, from this progressive company. Posted on 24 Mar
Back to the Future
It's the big return of Ropeye products! After almost two years of absence, this well-known brand is back in force on our waters, whether on new foiling dinghies, IMOCA's, maxi's, or to modernize and lighten older cruising boats. Posted on 18 Mar
Just the two of us
Upffront.com sponsors UK Double Handed Offshore Series for 2022 UKDHOS is coming back for its second year and Upffront.com is proud to be a sponsor! The 2022 season promises to be bigger and better than 2021, and we can't wait to see these competitive boats and sailors back out on the water. Posted on 11 Mar
Ronstan snap shackles
A more affordable alternative to a sailing staple? Hailing from Australia, Ronstan have been developing hardware for sailors since 1953. The Triggersnap™ shackles are the latest shackle range in their extensive catalogue of deck hardware solutions and Ronstan's own take on snap shackles. Posted on 2 Mar
Upffront 2020 Foredeck Club SW FOOTER