Please select your home edition
Upffront 2020 Foredeck Club SW LEADERBOARD

How many fenders do I need for my boat? - A complete guide

by Aleix Escorsell 4 Aug 16:00 UTC
Finding popularity in race boat world, there are an increasing number of flat fender options available on the market © Outils Ocean

Boat fenders, sometimes known as boat bumpers, are an essential piece of equipment for protecting the hull from contact with docks, pilings or other boats. They are an essential for avoiding damage to your boat and other boats around you.

This article will take you through the basic types of fenders, and help give you an estimate of exactly how many fenders, and what size, you need for your boat.

There are three main types of fender, and each type has its strengths and weaknesses.

Cylindrical Fenders

Cylindrical fenders are the most common fenders, suitable for hanging off the side of the hull. These fenders can be hung vertically when mooring against docks or other flat structures, alternatively, they can also be hung horizontally to avoid collisions with pilings and other protruding structures, or to prevent roll off.

Round Fenders

Round fenders are great for protecting areas of the boat that may be further from the dock, such as the stern or bow, because they cover a much larger surface area. It's also a good idea to have a round fender on hand to protect against other boats or obstructions during manoeuvres.

Flat Fenders

Finding popularity in race boat world, there are an increasing number of flat fender options available on the market. Similar to cylindrical fenders, flat fenders are suitable for hanging from the hull in either a horizontal or vertical position. They are more compact than cylindrical fenders, do not suffer from rolling around and they are even a comfortable retrofit bed to sleep on when racing offshore!!.

How big should my fenders be?

The rule of thumb is that a cylindrical fender should have approximately 3 cm of diameter for every 1.5 metres of boat length.

A round fender should have approximately 6cm of diameter for every 1.5 metres of boat length.

You may need to adjust this if you are mooring in particularly challenging conditions or if your boat is particularly heavy.

How many fenders do I need?

We recommend all boats carry a minimum of three fenders, and at least one fender for every 10 feet of waterline length. Therefore a 20ft boat should have three, and a 40ft boat should have four fenders, as a minimum

There are three important variables to consider when choosing which fenders, and how many, to choose for your boat; boat length, boat weight and mooring conditions. So the following table is only a very general guideline, based on a medium displacement monohull.

Boat Length (m)Cylindrical / Flat Fender Diameter (cm)Round Fender Diameter (cm)Recommended number of fenders
Under 5m10203

Most fenders are relatively lightweight and cheap when compared to the damage that could come from not having enough, so it's always better to have too many than too few!

Fender positioning

Hang your fenders from a suitable anchor point such as a stanchion or a cleat. You should have your fenders spaced apart with the central fender at maximum beam. Any round fenders will most likely need to be placed closer to the bow and stern, where the hull is further from the dock. Try and tie your fenders as low as possible to reduce swinging.

Position your vertical fenders so the bottom of the fender is just above the waterline. This will ensure the fender does not rise up over the dock and let it come in to contact with your boat. Do not position them too low, or they will start growing seaweed quite quickly!.

Cleaning and stowage

Many of our fenders use modern materials, rather than traditional hard rubber/plastic, which allows them to be inflated and deflated for storage. It's a good idea to stow them somewhere out of the way, but also easily accessible, if the fenders are needed in a hurry.

We recommend cleaning fenders with normal soap and water and refraining from using harsh cleaning agents such as acetone. Or, if you really want to protect your fenders, many of our brands also have fender covers available, to protect your fenders from UV and make cleaning even easier.


In our view, it's always better to invest in some great fenders and protect your boat, rather than risk damages and expensive trips to the repair yard. Make sure you buy an appropriate number of fenders and even some extras just in case.

Click the link below to see our selection of high quality fenders from reputable sailing brands, available in a range of colours and sizes, or if you need more advice on which fenders are best for you, contact us at

Shop Fenders

Related Articles

VSG Lifejackets reviewed
Combining safety with comfort Valeria San Giorgio also known as VSG is one of the oldest Italian companies to design and produce lifejackets. Starting in 1926 VSG began manufacturing sails and waxed clothes for merchant ships and then moved on to supplying the navy. Posted on 28 Jul
Best Practice for Eco-Friendly Waste Disposal
How to dispose of yacht waste while keeping the environment in mind Most sailors are environmentally conscious and want to do their part in preserving our planet. But when it comes time to dispose of yacht waste, it can be hard to know the best way to do this. Posted on 21 Jul
Turning Bottles Into Ropes
The Premiumropes Eco range is examined by Scientists are scrambling to come up with solutions to the plastic waste problem and find novel ways of recycling. Premiumropes are no different and have recently launched their Eco range of ropes featuring recycled Polyester. Posted on 15 Jul
Sailserver, your sailing adventure data log
An automated logbook that stores, shares and tracks via NMEA2000 Sailserver is a system that is tracking all your data provided through your NMEA200. It is smaller than a lunch box and enables you to share your data with friends and family. At the same time it is your automated logbook as well as your anchor alarm. Posted on 7 Jul
How to Anchor Your Boat the Eco-Friendly Way
Protect the seagrass which captures carbon faster than rainforests Anchoring can be a necessary and efficient way to secure your boat in certain circumstances, but it can also damage the seabed if not done properly. There are eco-friendly ways to anchor your boat that will help preserve the seabed. Posted on 30 Jun
Do you need a set of storm sails?
A necessity for offshore passages whether cruising or racing A good set of storm sails can be a get out of jail free card if you find yourself caught in heavy weather. A necessity for offshore passages whether cruising or racing and a prudent safety item for most cruisers. Posted on 22 Jun
Race through the night with Mantagua Racing Lights
Completely encapsulated in resin, and impressively light-weight Any experienced sailor will tell you, racing in low visibility or at night brings with it its own challenges and problems. The difference is quite literally, day and night. Posted on 17 Jun
Karver KFEC Eco Furlers
A better future and a better furler, using linen/flax fibres and bio resins In this article we shine a spotlight on the innovative construction technology in the Eco Concept furler range, and say congratulations to Karver Systems for doing their bit for the environment. Posted on 11 Jun
Simrad Tillerpilot reviewed
A cost effective extra pair of hands For shorthanded sailors, a good autohelm is like having an extra pair of hands on deck. But the cost of a full-blown system can be prohibitive for many smaller boats. A tiller pilot offers a cost-effective solution for boats up to 37ft in length. Posted on 27 May
Upffront 2020 Foredeck Club SW FOOTER