Please select your home edition
Edition
Leaderboard brokerage

Checking in with Classe Mini skipper Ambre Hasson about her 2025 Mini Transat campaign

by David Schmidt 2 Apr 15:00 UTC April 2, 2025
Ambre Hasson © www.ambresails.com

It's one thing to dream big, but it's a different notion altogether to make one's dreams a reality. Ambre Hasson, the Franco-American skipper of On the Road Again II (618), a Finot-Conq designed prototype Classe Mini, is in the latter category. Hasson, who only learned to sail in 2020, has spent the last two years living in France and immersing herself in the culture and world of single- and short-handed sailing, with the goal of participating in the 2025 Mini Transat.

In that time, Hasson has learned a lot about sailing, short- and singlehanded sailing, and about her commitment to the sport and the challenge of racing a 21-footer across the Atlantic Ocean all alone.

It hasn't all been easy or fun.

Take, for example, the time when her first Mini ended up on the rocks. Or the times when she couldn't keep up with her training partners, especially on the downhill legs. Or some reality-check racecourse results.

Luckily, there have also been victories.

Take the day that Hasson found and acquired On the Road Again II (618). Or the day that she learned to push herself against her training partners, even with the kite up. Or some of her solid racecourse results from the last season, including a second-place finish in the Mini Transmanche 2024

It's been a journey getting to this place, but for Hasson, the real adventure begins in September with the start of the 2025 Mini Transat.

This is the fifth interview with Hasson in her lead-up to her transatlantic adventure, and I checked in with her, via email, to get the latest on her campaign.

(The first four interviews can be found here: Part 1, Part 2, Part 3, and Part 4.)

It's been about eight months since we last checked in. Can you please give us an idea of what a day on your life typically looks like, now that we're about five months from the start of the 2025 Mini Transat?

The past eight months have seen more behind-the-scenes action than actual sailing. I split my time managing partnerships from my laptop, hands-on boat work (sanding, patching, you name it), and doing speaking engagements to share my journey.

It's quite a shift, switching from yard work to screen work, but it always makes for a good story on those video calls from the boatyard!

How much time each week are you spending at the gym or out running/cycling, etc.? Or do you have a different training regime going on?

I workout about three times a week, mixing running for endurance—reminiscent of my marathon days—and strength training. Lately, my strength sessions involve long-boarding my hull, [which is] surprisingly effective! I throw in some cycling and other outdoor activities to keep it varied.

What have you been working on in terms of refitting the boat? Are we talking about a full refit, or are you focusing mostly on the areas where you'll likely see the biggest ROIs?

I've fully dismantled my boat to inspect and overhaul every aspect of it, effectively turning it into what looks more like a spaceship than a sailboat. I've replaced fatigued hardware like the keel bearing, repaired a significant crack beneath an old carbon patch on the freeboard, and added CNC-machined carbon plate reinforcements for deck hardware.

I've also inventoried and replaced all lines, including outdated standing rigging, and I'm in the process of repainting the entire vessel. Balancing these upgrades with a tight budget has been challenging—deciding to replace the €1000 keel bearings, despite initial budget constraints, was particularly tough but necessary due to significant wear.

You mentioned that you have a new rig. What are the details of your new set-up?

I've upgraded from old PBO rigging to new SK99 rigging, thanks to support from my new technical sponsor, Robline. This change was necessary as the old rig was four years old and showing signs of fatigue.

Additionally, I've increased the purchase in the rigging to simplify adjustments to the rig's rake. I'm also enhancing other key areas, such as my 3D system for trimming the jib and the mechanism for lifting the daggerboards, to improve overall performance.

Did you also replace some (or all) of your sails? If so, can you please walk us through new additions to your inventory?

Unfortunately, due to budget constraints, I haven't been able to update my sails yet. I'm particularly concerned about my mainsail and Code 0, both of which urgently need replacing. Designing the Code 0 is challenging because it must perform well in both heavy air (reaching/broad reaching) and light air (close reaching).

Given my experience and the optimization of my spinnakers for downwind VMG, it makes sense to focus the Code 0's design on heavy conditions, where I currently feel most constrained.

What races are you planning on participating in this year? Also, what attracts you to these particular races, given the menu of Classe Mini events that you have to choose from?

This year, I'm focusing on the Mini en Mai, a 500nm solo challenge, and the Fastnet, a 600nm double-handed race. I'm also considering the Puru Transgascogne, another 600nm solo race in the Bay of Biscay, which mirrors the route we'll take during the Transat.

The strategy is to stay sharp without overextending—both the boat and myself. My goal is to head into the Transat bursting with energy, having balanced intense competition with ample offshore training.

What do you see as your biggest strengths going into the Mini Transat?

That's a fantastic question. I believe my mental strength is one of my biggest assets—the journey to this point has been long and full of unexpected challenges, which I've learned to navigate both on land and at sea.

I'm also comfortable in heavy conditions and know how to safely push my boat to its limits. After countless hours of working on my boat, I know it inside out. While I haven't tested it over such long distances yet, I'm confident in my ability to handle any issues that might arise.

As a follow-up to that last one, what do you see as your biggest weaknesses? And how do you plan to address these in the next five months?

I need to improve on weather strategy and navigation for oceanic racing, which is quite different from the coastal offshore racing I've experienced so far. Although I've been trained theoretically, applying these strategies in the real world is another challenge. Over the next five months, I'll focus on practical application through simulations and real-world practice to bridge the gap between theory and actual conditions.

You mentioned that you have some new sponsors. Who are they, and what has been your most successful pitch angle (or angles) to differentiate yourself from the other Mini Transat entrants?

Yes, I've been fortunate to gain support from a wonderful array of sponsors. As a Franco-American skipper, my journey appeals globally, which aligns well with partners like Adjuvoo, Kilpatrick Townsend & Stockton, Solib, Nautix, Robline, Helly Hansen, Spinlock, MX3, NV Charts, and 727 Sailbags.

This dual heritage enriches my campaign, resonating across two cultures and broadening the appeal. Sharing my authentic, gritty sailing story has struck a chord, resonating more deeply than many high-profile campaigns. It's about real adventure, real challenges, and a real person tackling them head-on.

Is there anything else about your campaign and your preparations for this year's Mini Transat that you'd like to add, for the record?

It really hit me when I saw my name on the official list for the Mini Transat, the only one with 'USA' next to it, that I am setting off solo across the Atlantic in five months. All those hours working on my boat, dealing with the naysayers, waking from nightmares of losing another boat, and days where pasta was all I could afford—it's all been building up to this moment.

Those endless surfs to Guadeloupe, the ocean all to myself, and the faces of loved ones waiting in the Caribbean. Now the hard truth is that as of today, I'm still short on funds to ensure I can start, let alone finish. We're hustling to find the partners to get me, and us, to that finish line.

[Editor's note: Hasson's website is www.ambresails.com, her email address is , and her Instagram handle is @ambre_sails.]

Related Articles

Jazz Turner's fundraising target is smashed
Already £30k raised for Sailability, so it's time to up the ante Jazz Turner has now passed the northern-most tip of Ireland and is on her way to the Shetland Islands, and at the same time her fundraising total of £30,000 has been smashed! Posted on 15 Jun
Jazz Turner is now nearing Ireland
Fundraising circumnavigation almost hits the £30k target after just 8 days afloat As at the 10th June Jazz is 8 days out from Brighton, and starting to near Ireland. Jazz had hoped to be further along than this, but the winds have been forcing her to stay close-hauled ever since she started. Posted on 10 Jun
Video Interview: Onboard the Excess 14
At the Sanctuary Cove International Boat Show 2025 Excess have moved forward their designs with the Excess 13 and 14 cruising catamarans, so seeing the Excess 14 was high on the priority list, as well as talking to some exceptional high performance sailors on board to learn their thoughts. Posted on 3 Jun
Jazz Turner sets off around the British Isles
Wheelchair cast aside for a gruelling fundraising voyage for Sailability We have been following Jazz Turner on a quest to become the first female wheelchair user to complete a solo, non-stop, unassisted circumnavigation of the British Isles. Today she left Brighton Marina, velcro-ed to the windward side on the epic voyage. Posted on 2 Jun
Where to purchase adaptive sailing equipment
Seats, hoists, etc for sailors with a disability Several organisations have contributed their knowledge regarding where to purchase adaptive sailing equipment such as seats for dinghies and hoists for wheelchair users to get into boats. Posted on 1 Jun
Exposure Marine Fastnet Race Kit Video Review
A set of 3 torches specifically designed for offshore racing crews It's a huge year for offshore sailing, and arguably the biggest event of the summer is the Rolex Fastnet Race. Within an hour of entries opening the Royal Ocean Racing Club had received a record 435 yacht registrations. Posted on 14 May
How Seldén Carbon Masts are made
I took a look around the Seldén Mast factory with Richard Thoroughgood to find out more I took a look around the Seldén Mast factory with Richard Thoroughgood from Seldén to find out a bit more about how the carbon tow reels become the masts that we use when out sailing. Posted on 12 May
A look inside the Spirit Yachts yard
A close look at what makes their yachts unique Traditional skills in boatbuilding could be regarded as a lost art from a bygone era. In the world of fibreglass and carbon, the joinery and laminating techniques of wood ribs and cedar strips are a thing of the past. Posted on 28 Apr
The holistic approach of Ancasta Yacht Services
Helping owners protect their investment and keep their boat in top condition Take a look behind the wood, gelcoat and trim panels on any modern yacht or powerboat, and you'll see that they are complex things. An array of cables, hoses & pipes interconnects electronic devices and amenities which make life on board more comfortable. Posted on 17 Apr
Jazz Turner explains more about Project FEAR
She will leave the wheelchair behind to sail unassisted around the British Isles for charity I caught up with Jazz Turner, who cited "the pure freedom I get when on the water" as the most important thing to her. Most of us sailors can appreciate that, but what we cannot really empathise with is being told you may only have 6 months to live. Posted on 15 Apr
Exposure MarineHyde Sails 2024 - One DesignMarine Products Direct 2023 - Calypso FOOTER